8 Inch Diameter 203mm DTH Hammer Bit Customized Color Mining Rock
Drilling Tools
Product Information:
• Matching for DTH hammer.
• DTH hammer is a part of down hole drilling rig, which is a
working device of down hole drilling rig. Submersible hole impactor
is divided into low air pressure submersible hole impactor, medium
air pressure submersible hole impactor and high air pressure
submersible hole impactor.
Specification:
Bit size | Shank type | Recommended DTH bit diameter |
3.5''/3'' DTH Hammer bits | COP34, DHD3.5, MISSION30, BR3 shank | 90mm to 105mm |
4'' DTH Hammer bits | DHD340, QL40, MISSION40, SD4 shank | 110mm to 130mm |
5'' DTH Hammer bits | DHD350, QL50, MISSION50, SD5 shank | 134mm tio 152mm |
6'' DTH Hammer bits | DHD360, QL60, MISSION60, SD6 shank | 152mm to 203mm |
8'' DTH Hammer bits | DHD380, QL80, MISSION80, SD8 shank | 203mm to 305mm |
12'' DTH Hammer bits | DHD112, SD12 and QL120 shank | Available upon to customers' request |
Applications:
• Underground mining
• Quarry benching operations
• Water well drilling
Charateristics:
The drill bit is the main component of the drilling rig and is the
tool that transmits the impact energy and makes direct contact with
the rock to blast.
The drill bit is subject to complex forces throughout its
operation, so there are high requirements for the material and
shape of the manufactured bit. When operating with the eccentric
drill bit, it is necessary to grasp the technical essentials. The
drilling parameters selected should be based on the principles of
low speed, low feed pressure and high upward wind speed, and the
drilling speed should be controlled during the construction
operation according to the hardness, looseness and water content of
the rocks in the stratum drilled. When the drill encounters a
particularly loose or large fissure stratum, it is especially
necessary to reduce the feed speed and feed pressure and repeatedly
discharge slag to clear the hole.
Advantages:
• High drilling efficiency, long drilling tool life, submersible
impactor drilling, the medium is air, no flushing media recovery
and disposal problems, reducing the auxiliary time.
• Low cost of use, the submersible impactor requires small shaft
pressure and low speed of the drilling rig, while the torque is
low, so the natural power consumption is small, and the diameter of
the drill pipe is relatively thin, easy to install and disassemble,
and the service life is long.
• Submersible percussion drilling, the hole wall is more complete,
there is no pollution from other media, basically can preserve The
original formation structure and water permeability can be
maintained, which reduces the well washing time and saves costs.
• In severe leakage formations and unstable hole wall formations,
the submerged percussion can be used to follow the pipe drilling to
completely solve the problem of repeated operations.
• As the submerged hole impactor uses wind as the power source, it
greatly reduces the workload of cold-proofing in the previous
winter construction due to the severe cold winter construction.
